Structures and characteristics of the windy atmospheric boundary layer in the South China Sea region during cold surges     

CHENG Xue-Ling  HUANG Jian  WU Lin  ZENG Qing-Cun 《大气科学进展》2015,32(6):772-782

An observational analysis of the structures and characteristics of a windy atmospheric boundary layer during a cold air outbreak in the South China Sea region is reported in this paper. It is found that the main structures and characteristics are the same as during strong wind episodes with cold air outbreaks on land. The high frequency turbulent fluctuations(period<1 min) are nearly random and isotropic with weak coherency, but the gusty wind disturbances(1 min相似文献   

一种CORS站高程序列噪声识别算法     

吉长东  吕广涵  张恒璟  崔东东 《测绘科学》2021,46(3):8-16

针对能量密度谱判断噪声与信号主导模态分界点性能不稳定的问题,该文提出基于夹角余弦的分界点判断方法。该方法首先利用EEMD对CORS站高程数据进行分解,其次计算原始信号与各阶模态分量的夹角余弦值,最后根据夹角余弦值的首次逆向转折位置判定噪声主导模态和信号主导模态的分界点。以4个CORS基准站近20年原始高程时间序列信号为研究对象,对噪声与信号模态分量分界点进行判定,实验结果表明采用基于夹角余弦的判定方法可以一次判断出噪声和信号模态分量的分界点。该方法应用到CORS站高程信号与噪声序列的识别中性能更加稳定。  相似文献   

利用FY-3C折射率对大气边界层高度的反演与分析     

朱洲宗  徐晓华  罗佳 《武汉大学学报(信息科学版)》2021,(3)

2013年中国发射了首颗进行全球导航卫星系统(global navigation satellite system,GNSS)掩星观测的气象卫星风云3号C星(Fengyun-3C,FY-3C),且已发布自2014年6月以来的FY-3C掩星大气产品,但目前还未见将其应用于大气边界层的相关研究。首次尝试利用FY-3C折射率产品确定边界层高度并进一步进行空间分布分析。结果表明,在小波协方差变换法基础上,进行尖锐度约束,能够确定FY-3C掩星低层大气折射率廓线中可能存在的突变,反演边界层高度。所得到的2015―2018年各年边界层高度全球分布在不同纬度及海洋和陆地上的差异基本体现了边界层与地表气候及地形的关系,但FY-3C折射率产品在低层大气的精度和垂直分辨率相对较低。因此,反演成功率总体上较低,反演结果对边界层高度空间分布细节特征的呈现仍有待提升。  相似文献   

A Kinematic Thermal Model for Descending Slabs with Velocity Boundary Layers: A Case Study for the Tonga Subducting Slab   总被引：3，自引：0，他引：3  

ZHANG Keliang an  WEI Dongping 《《地质学报》英文版》2011,85(1):211-222

For the purpose of investigating the influence of metastable olivine (MO) phase transformations on both deep seismicity and stagnation of slabs, we constructed a 2-dimensional finite element thermal model for a 120 Ma-old 50o dipping oceanic lithosphere descending at 10 cm/yr with velocity boundary layers, which would mitigate the interference of constant velocity field for the slab. The resulting temperatures show that most of intermediate and deep earthquakes occurring within the Tonga slab are occurring inside the 800oC and 1200oC isotherm, respectively. The elevation of olivine transformation near ~410 km and respective persistence of metastable olivine and spinel within the transition zone and beneath 660 km would thus result in bimodal positive, zonal, negative density anomalies, respectively. These results together with the resulting pressure anomalies may reflect the stress pattern of the Tonga slab: (i) slab pull force exerts above a depth of ~230 km; (ii) MO existence changes the buoyancy force within the transition zone and facilitates slab stagnation at a depth of 660 km; (iii) as the subducting materials accumulated over 660 km, deepest earthquakes occur due to MO transformation; (iv) a flattened ‘slab’ may penetrate into the lower mantle due to the density increment of Sp transformation.  相似文献   

Radiometric Zircon Ages of a Tuff Sample from the Baishantou Member of Wuyun Formation,Jiayin: A Contribution to the Search for the K‐T Boundary in Heilongjian River Area,China     

SUZUKI Shigeyuki  SUN Ge  Ulrich KNITTEL  DANHARA Tohru  IWANO Hideki 《《地质学报》英文版》2011,85(6):1351-1358

The existence of the Cretaceous-Tertiary (K/T) boundary in the non-marine succession is expected at Jiayin in the Heilongjiang River area, China. Zircons from a tuff sample from the Baishantou Member of Wuyun Formation in Jiayin were analyzed by the laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) U-Pb dating and fission-track dating methods. Ages of 64.1±0.7 Ma (U-Pb) and 61.7±1.8 Ma (fission-track dating) were obtained, which allow re-evaluation of a previously reported late Maastrichian age for the tuff layer that was in conflict with the paleontological evidence. These results confirm the Danian age of the section in agreement with the paleontological evidence.  相似文献   

“含煤系统”地质要素分析及描述     

李增学  吕大炜  王怀洪  王佟  魏久传  刘海燕 《中国煤炭地质》2011,(9):1-4

在构建＂含煤系统＂及子系统的基础上,分析了＂含煤系统＂的主要地质要素以及＂含煤系统＂中各地质作用类型。研究表明：＂含煤系统＂的构建关键是系统边界的确定,由于＂含煤系统＂具有特定的地区、地层与时代范围,因此可以通过研究煤系形成时代、展布范围等基本地质要素进行分类和描述。  相似文献   

上海湖沼平原地貌分界线上地层分布特征研究   总被引：1，自引：0，他引：1  

孙莉 《上海国土资源》2011,32(4):68-72

上海湖沼平原和滨海平原地貌类型划分应遵从地貌特征,为工程应用方便,可划分地貌亚区。地貌分界线上典型的地质剖面,为湖沼平原第一硬土层与滨海平原暗绿色硬土层属于同一地质时代提供了直接证据。由于古河道、台地等古地貌特征,造就了不同地貌及地貌亚区之间地层差异。  相似文献   

Geological comparative studies of Japan Arc System and Kyushu-Palau Arc   总被引：5，自引：3，他引：2  

YAN Quanshu  SHI Xuefa 《海洋学报(英文版)》2011,30(4):107-121

Based on the published data of structure geology,geochronology,petrology and isotope geochemistry,the authors of this paper have conducted studies on the tectonic evolution history of Japan arc system and Kyushu-Palau ridge(KPR) . The studies show that the initial Japan arc system was resulted from the subduction of ancient Pacific plate beneath Eurasian Plate in Permian. It was part of an Andean-type continental volcanic arc which occurred in the offshore in the east of Asian during late Mesozoic era. The formation of tertiary back-arc basin(Japan Sea) resulted in the fundamental tectonic framework of the present arc system. Since Quaternary the system has been lying at E-W compression tectonic setting due to the eastward subduction of Amur Plate. It is expected that Japan arc system will be juxtaposed with Asian continent,which is similar to the present Taiwan arc system. The origin of Philippine Sea Plate(PSP) is still in debate. Some studies argued that it is a trapped oceanic crust segment,while the others insisted that it is a back-arc basin accompanied with ancient IBM arc. However,it is all agreed that the tectonic evolution of PSP started since 50 Ma,i.e.,PSP has drifted from the site around equator at 50 Ma to the present site,and the subduction of PSP along Nankai trough-Ryukyu Trench beneath the Japan arc system during 6-2 Ma led to the formation of the present Ryukyu arc system. Of the PSP,the KPR has been found with the oldest rocks formed at 38 Ma. Combining with its geochemical characteristics of oceanic arc tholeiite,it is suggested that KPR is an intraoceanic volcanic arc,more specifically,a relic arc(i.e.,rear arc of the ancient IBM) after rifting of ancient IBM. In addition,Amami-Daito province is of arc tectonic affinity,but has been affected by mantle plume. Therefore,based on their respective tectonic evolution history and geochemical characteristics of rock samples,it is inferred that there is no genetic relationship between Japan arc system and KPR. It is noted that rocks reflecting continental crust basement feature have been collected on the northern tip of KPR,which may be related to the process of KPR accreting on Japan arc,but the arc-continent accretion process are still at initial stage of modern continental crust accretion model. However,due to the scarcity of data of the northern tip of KPR,crustal structure of this location and its adjacent Nankai trough need to be further constrained by geophysical studies in the future.  相似文献   

预修正快速傅里叶变换高阶边界元方法在波浪对物体作用问题中的应用   总被引：1，自引：0，他引：1       下载免费PDF全文

姜胜超  滕斌  勾莹  宁德志 《海洋学报》2011,33(3):38-46

边界元方法被广泛应用于波浪对海上婕筑物作用领域,但由于传统边界元方法的存储量和计算量均为未知量的平方量级,很难满足大范围多未知量问题的计算需要.本文基于高阶边界元方法,应用预修正快速傅里叶变换方法,使计算量与存储量分别降低至O(NlogN)和O(N)量级,并得到一个连续的压强分布以适应结构设计的要求,同时可以通过使用满...  相似文献   

Characteristics of the boundary layer at the bottom of a solitary wave     

Giovanna Vittori  Paolo Blondeaux 《Coastal Engineering》2011

The results of direct numerical simulations of the boundary layer generated at the bottom of a solitary wave are described. The numerical results, which agree with the laboratory measurements of Sumer et al. (2010) show that the flow regime in the boundary layer can be laminar, laminar with coherent vortices and turbulent. The average velocity and bottom shear stress are computed and the results obtained show that the logarithmic law can approximate the velocity profile only in a restricted range of the parameters and at particular phases of the wave cycle. Moreover, the maximum value of the bottom shear stress is found to depend on the dimensionless wave height only, while the minimum (negative) value depends also on the dimensionless boundary layer thickness. Diagrams and simple formulae are proposed to evaluate the minimum and maximum bottom shear stresses and their phase shift with respect to the wave crest.  相似文献